dot dot
dot
Tilite...the replacement of Gold Alloy article

                                                                                                                              

          This   = 

or This         =  

                                 Tested and Approved
             Tilite Alloys have undergone extensive university testing and have been used in over 100 million   
          restorations.  Tilite Alloys are approved by the FDA, are ISO 9002 Certified and have earned the CE mark.

                                  Biocompatibility
             Tilite is a medically pure Titanium type of alloy insuring biocompatibility - a requirement for use with dental implants.

                                  Performance Tilite Alloys out perform all other ceramic alloys in the following areas:

• Castability • Oxide formation • Compressive strength
• Finishing • Porcelain bond

• May be used with implants

 

P = Premium    S = Star    V = V   Omega = Omega 
Tilite Alloys

Physical Properties

  Star Premium "V" Omega
 Color  Silver  Silver  Silver  Silver
 C.T.E @ 500 C  14.5  14.0  13.6  13.2
 C.T.E. @ 600 C  14.6  14.1  13.7  13.4
 Melting Range  2200-2375F /
 1204-1302C
 2200-2375F /
 1204-1302C
 2200-2375F /
 1204-1302C
 2200-2375F /
 1204-1302C
 Casting Temp.  2425F / 1329C  2200F 1329C  2425F 1329C  2425F 1329C
 Brinnell
 
Hardness
 205  215  225  240
 Yield Strength  115,000 psi  96,000 psi  98,000 psi  100,000 psi
 Tensile Strength  155,000 psi  154,000 psi  148,000 psi  135,000 psi
 Elongation  12%  11%  10%  8%
 Specific Gravity  7.7  7.7  7.7  7.7
 
 
Tilite Porcelain List
Talladium offers five Tilite Alloys with Titanium in five co-efficiency ranges keyed to the different porcelains.
Please check the list below to determine the correct alloy you need to use for the porcelain you are using in your lab.

Star Alloy

  Avante Spectrum
  Ceramco II Silver Synspar

  Noritake EX-3

 
 

Premium Alloy

    Carmen * Excelsior * Pencraft
 * Ceramax * Finesse**   Silhouette
 * Ceramco    Fortune   Solera
 * Ceramco II    Illusion * Tru-Est
 * Ceramco III *Jelenko * Vintage-Halo
    Dentsply/Ceramco   Life Essence * Vision (bisque bake 10 ฐC higher)
    Duceram *Micro-Bond * Wilceram
    Elephant   Microlucent  
  * Excelco * Olympic II  

**Talladium suggest using the regular opaque in a neutral shade, like the A-2, for the first opaque coat and fire at 1850ฐ - 1875ฐF.  Then on the second coat use the Finesse opaque 

"V" Alloy

  *BMK    Symbio Ceram
  *Creation  *Vintage (Regular)
    Duceram Plus  *VMK-68 & VMK-68N
    Elite  *Vita Omega 900 
    Heraceram  

*These have been approved and tested by Talladium

Omega Alloy

 *IPS d.sign  *Omega
 *IPS Classic  *VMK-95



GOLD COLUMN

โลหะที่เราใช้ The metal we use article
Removable ของเรา



dot
OUR PRODUCTS / GENERAL
dot
bulletREMOVABLE
bulletFIXED WORK PIECES
dot
OUR PRODUCTS / ALL CERAMIC
dot
bulletVITA IN CERAM, Fibrekor
bulletCarrara System
bulletZirconium Framework
bulletIPS Empress
dot
OUR PRODUCTS / IMPLANT
dot
bulletOur Implant work
dot
ALLOYS WE USE
dot
bulletอัลลอยที่เราใช้ The alloys we use
dot
JOB DURATION
dot
bulletDuration of Job ordered/ระยะเวลาในการทำงาน
dot
ERA SYSTEM SERVICE
dot
bulletERA SYSTEM


Copyright © 2010 All Rights Reserved.
This website is designed by Dr.Amrit DMD Centro Escolar Universiy Tel.089-155-7971 ออกแบบเว๊ปโดย ทพ. อมฤต Tel.089-155-7971